Fluoride Reduction Filters

fluoride-prefilter-&-hous

The material in this prefilter removes fluoride through a chemical reaction with the media; thus the removal is not dependent on ion exchange.  Ion Exchange filters are often presented as fluoride filters. Unfortunately, although they do remove up to 60% of the fluoride from drinking water, they store it and once ion exchange reduces through usage, all the stored fluoride will be re-released into the water.

Note: Requires Pre-filter housing
         May be added to existing standard 10" filter systems.

The filter contains specially processed natural Crystalline Activated Alumina to reduce fluoride in source water.  The cartridges are designed to perform at slow controlled flow rates to ensure maximum performance by the media.

The filter will last up to 2500 litres - at least six months in normal family use.

More details

Fluoride Reduction Filter including Housing, Fittings, Cartridge & Spanner

Add to cart

Easily Install inline between your water source and your ioniser or most other water filters.

For most water filters & water ionisers that use 1/4" hose the QuickFit fittings mean no tools required.

For Nifty Thrifty, Masterpiece, Mavello & Microlite water ionisers a screwdriver is needed to install. 

Just cut your present in-line hose where you want the prefilter to site, and connect to the prefilter.

A five minute job.

The spanner makes changing the cartridge easy.

Fluoride Reduction Filter - Cartridge

Add to cart

The prefilter will last up to 2500 litres - at least six months in normal family use.

Note: Requires Pre-filter housing
         May be added to existing standard 10" filter systems.